Skip to content
brep-conformancegithub

arris 0.10.0

suite 1.0.0 · 11-18-2026 run

60.5%pass at 1e-7 mm, over all 3487 cases3rd of 4 kernels · 4.05× the fastest’s time
geometry failuresthe shape itself is wrong
107
measurement failuresthe shape is right, a measured value is off
18
exact testsone answer is right
62.4%1995 of 3195
sound testsany valid answer within limits
0.0%0 of 140
rejection testsinput the kernel must refuse
76.3%116 of 152
total case time
3 h 57 min
booleans76.8%962 of 12538 unsupported · 278 refused · 2 timeout · 3 fail
chamfers67.3%115 of 17156 unsupported
constructions49.8%223 of 448161 unsupported · 43 timeout · 21 fail
fillets52.3%328 of 627196 unsupported · 60 refused · 43 fail
modify32.0%157 of 490297 unsupported · 36 refused
parts51.8%29 of 5614 unsupported · 7 refused · 6 timeout
queries59.9%187 of 312107 unsupported · 18 fail
step84.6%110 of 13020 refused
operations not offered25

sphere sent as revolve, torus sent as revolve, cone sent as revolve, slab, fillet_radii, fillet_variable, fillet_conic, fillet_g2, fillet_setback, fillet_setback_g2, fillet_faces, full_round, chamfer_two, chamfer_distances, offset, delete_faces, move_faces, thicken, draft, sew, curvature, betti, project, bounding_box, affine

120 tests · 1376 of 3487 cases
booleans/overlap/boxescases 1 of 60result 1 unsupportedwhy moved a ∩ moved b: unsupported: no closed form for (plane surface) against (line curve)median time 98.3 ms
booleans/degenerate/equal-cylinders-crossingcases 20result 20 refusedwhy a ∖ b: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not holdmedian time 3.38 s
booleans/tolerance/spheres-overlapping-by-a-haircases 1 of 40result 1 refusedwhy section: invalid: degenerate result: a section passes a face's apex or pole without running through it, nearer than the face's (u, v) resolvesmedian time 821 ms
booleans/scale/far-from-origin-equal-cylinderscases 5result 5 refusedwhy a ∖ b: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not holdmedian time 3.54 s
booleans/touching/sphere-in-a-torus-holecases 2 of 6result 2 refusedwhy a ∪ b: invalid: degenerate result: the faces touch along a curve interior to both result facesmedian time 90.8 ms
booleans/touching/torus-around-a-cylindercases 2 of 14result 2 refusedwhy a ∪ b: unsupported: no closed form for (cylinder surface) against (circle curve)median time 196 ms
booleans/touching/sphere-in-a-cylindercases 2 of 10result 2 refusedwhy a ∖ b: invalid: degenerate result: the faces touch along a curve interior to both result facesmedian time 151 ms
booleans/tolerance/sphere-shaved-by-a-haircases 6 of 30result 6 refusedwhy section: invalid: degenerate result: a section passes a face's apex or pole without running through it, nearer than the face's (u, v) resolves +2 other reasonsmedian time 147 ms
booleans/touching/boxes-face-to-facecases 19 of 30result 19 refusedwhy a ∪ b: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not holdmedian time 44.0 ms
booleans/touching/spheres-at-a-pointcases 17 of 20result 17 refusedwhy a ∪ b: unsupported: no closed form for (sphere surface) against (circle curve) +1 other reasonsmedian time 15.6 ms
constructions/spline-prismcases 60result 60 unsupportedwhy making an operand: unsupported: arris profiles have no spline segmentmedian time 0.00 ms
booleans/overlap/cone-and-cylinder-coaxialcases 1 of 30result 1 refusedwhy a ∖ b: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not holdmedian time 357 ms
booleans/touching/cone-at-its-apex-or-along-a-linecases 32result 32 refusedwhy a ∪ b: unsupported: no closed form for (plane surface) against (point) +2 other reasonsmedian time 105 ms
booleans/overlap/solid-inside-solidcases 32result 32 refusedwhy a ∖ b: invalid: degenerate result: the faces touch along a curve interior to both result faces +1 other reasonsmedian time 137 ms
booleans/tolerance/box-faces-a-hair-apartcases 30 of 40result 2 unsupported28 refusedwhy a ∪ b: invalid: degenerate result: the faces touch along a curve interior to both result faces +12 other reasonsmedian time 34.0 ms
booleans/scale/microns-to-metres-equal-cylinderscases 7result 7 refusedwhy a ∖ b: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not holdmedian time 2.74 s
booleans/scale/microns-to-metres-spherescases 2 of 5result 2 refusedwhy mesh: failed: f5546's interior lattice would need 2709792 points +1 other reasonsmedian time 10.1 s
booleans/scale/microns-to-metres-boxescases 1 of 8result 1 refusedwhy a ∪ b: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not holdmedian time 44.0 ms
booleans/sequences/stacked-boxescases 10 of 20result 2 unsupported8 refusedwhy making an operand: invalid: degenerate result: the result's shells would touch along an edge or at a vertex, which a solid does not hold +1 other reasonsmedian time 0.00 ms
booleans/overlap/solids-apartcases 1 of 40result 1 refusedwhy a ∪ b: invalid: degenerate result: a section passes a face's apex or pole without running through it, nearer than the face's (u, v) resolvesmedian time 56.8 ms
queries/normals-and-creasescases 17 of 40result 17 unsupportedwhy normal: unsupported: a point on an edge or a vertex, where several faces meetmedian time 17.1 ms
constructions/smooth-loft-through-equal-sectionscases 12result 12 failwhy B0: 115 of 4096 points placed differently; 115 sample points placed wrongly, 1 allowed +11 other reasonsmedian time 1.99 ms
booleans/overlap/part-and-its-mirror-imagecases 1 of 32result 1 unsupportedwhy a ∪ mirrored a: unsupported: no closed form for (plane surface) against (line curve)median time 1.54 ms
queries/bounding-boxcases 30result 30 unsupportedmedian time 0.00 ms
booleans/a-solid-with-itselfcases 30result 30 refusedwhy a ∪ a: invalid: degenerate result: a body is an operand of the boolean twicemedian time 6.72 ms
modify/sew-faces-into-a-solidcases 24result 24 unsupportedmedian time 0.00 ms
queries/curvature-on-spherescases 4result 4 unsupportedmedian time 0.00 ms
queries/curvature-on-conescases 4result 4 unsupportedmedian time 0.00 ms
queries/curvature-in-holescases 9result 9 unsupportedmedian time 0.00 ms
queries/curvature-on-toricases 3result 3 unsupportedmedian time 0.00 ms
queries/curvature-on-box-facescases 6result 6 unsupportedmedian time 0.00 ms
queries/curvature-on-cylinderscases 4result 4 unsupportedmedian time 0.00 ms
queries/hidden-lines-of-a-boxcases 8result 8 unsupportedmedian time 0.00 ms
queries/hidden-lines-of-a-spherecases 6result 6 unsupportedmedian time 0.00 ms
queries/hidden-lines-of-a-cylindercases 4result 4 unsupportedmedian time 0.00 ms
queries/hidden-lines-of-a-drilled-boxcases 7result 7 unsupportedmedian time 0.00 ms
queries/hidden-lines-of-a-box-behind-a-boxcases 5result 5 unsupportedmedian time 0.00 ms
queries/display-of-a-spherecases 7result 7 failwhy B42: edges: vertices off by up to inf, chords inf, creases uncovered by 0.000e0; length 12.441502 of -0.000000 +6 other reasonsmedian time 6.13 ms
queries/display-of-a-cylindercases 8result 8 failwhy B42: edges: vertices off by up to 4.441e-16, chords 2.990e0, creases uncovered by 9.706e-3; length 25.336529 of 19.396879 +7 other reasonsmedian time 1.14 ms
queries/display-of-a-drilled-boxcases 3result 3 failwhy B42: edges: vertices off by up to 3.331e-16, chords 2.127e0, creases uncovered by 9.799e-3; length 73.969225 of 69.757075 +2 other reasonsmedian time 1.09 ms
booleans/touching/along-a-linecases 32result 32 refusedwhy a ∪ b: invalid: degenerate result: the faces touch along a curve interior to both result faces +1 other reasonsmedian time 187 ms
booleans/touching/bore-flush-with-a-facecases 20result 17 refused3 failwhy a ∖ b: invalid: degenerate result: the faces touch along a curve interior to both result faces +3 other reasonsmedian time 342 ms
booleans/touching/pocket-flush-with-a-facecases 2 of 30result 2 unsupportedwhy moved a ∩ moved b: unsupported: no closed form for (plane surface) against (line curve)median time 140 ms
booleans/patterns/holes-packed-tightcases 11 of 24result 11 refusedwhy all at once ×24: invalid: degenerate result: the faces touch along a curve interior to both result faces +2 other reasonsmedian time 55.4 ms
constructions/height-field-slabcases 40result 40 unsupportedmedian time 0.00 ms
constructions/sweep-along-a-splinecases 24result 11 unsupported13 timeoutwhy a: "check" took longer than 120s +1 other reasonsmedian time 120 s
constructions/spherecases 12result 12 unsupportedmedian time 0.00 ms
constructions/toruscases 12result 12 unsupportedmedian time 0.00 ms
constructions/conecases 12result 12 unsupportedmedian time 0.00 ms
constructions/helical-sweepcases 30result 30 timeoutwhy a: "check" took longer than 120smedian time 120 s
license
MIT OR Apache-2.0
declared tolerance
1e-7 mm
adapter license
MIT
adapter reviewed by
the suite’s maintainers
contract
1.0.0
tiers
1e-7 · 1e-6 · 1e-5 · 1e-3 mm
runner
the suite’s benchmark machine
finished
2026-11-18 04:36:57 UTC
os
linux
architecture
x86_64
cores
24
threads
24