chamfer_two
Blends · api.md § chamfer_two · all operations
definition
chamfer_two(s: Solid, edge: Point3, face: Point3, d1: Length, d2: Length) -> Solid
Bevels one edge unevenly. The cut runs through two lines: the line d1 back from the edge along the face that face names, and the line d2 back from the edge along the other face that meets there. Between planes, the section the cut takes off is the triangle on those two lines. A chamfer given by a distance and an angle from the named face is a chamfer_two with d2 = d1·tan(angle).
Both distances must be positive, each cut must be on its face, and face must name one of the two faces that meet at the edge.
Example. Solid 1 is a 10 × 20 × 30 mm box with one corner at the origin.
> {"cmd": "chamfer_two", "s": 1, "edge": [0, 0, 15], "face": [0, 10, 15], "d1": 1, "d2": 2}
< {"ok": 2}common to blends
An edge is named by a point on it. Each point names the edge of s that passes within 10·ε of the point, where ε is the suite's tolerance of 1e-7 mm. A call with a point that names no edge refuses. Naming an edge by a point does not depend on how any kernel numbers or labels its topology, and a test can compute such a point from the solid's definition.
A blend runs along the whole tangent chain of its edge. The chain is the named edge and every edge reached from it through vertices where the next edge leaves in the direction in which the last edge arrived. The top loop of a prism on a rounded rectangle is one chain, so a point on any edge of that loop blends the whole loop. Following the chain is the work of the function, and so of the kernel. An adapter passes on the edge the point names and no other edge.
| Function | Fields | Returns |
|---|---|---|
fillet | s, edges, radius | Solid |
fillet_radii | s, edges, radii | Solid |
fillet_variable | s, edge, from, r_from, r_to | Solid |
fillet_conic | s, edges, setback, rho | Solid |
fillet_g2 | s, edges, offset, center | Solid |
fillet_setback | s, edges, radius, setback | Solid |
fillet_setback_g2 | s, edges, radius, setback | Solid |
fillet_faces | s, face_a, face_b, radius | Solid |
full_round | s, side_a, middle, side_b | Solid |
chamfer | s, edges, distance | Solid |
chamfer_two | s, edge, face, d1, d2 | Solid |
chamfer_distances | s, edges, distances | Solid |