fillet_conic
Blends · api.md § fillet_conic · all operations
definition
fillet_conic(s: Solid, edges: list<Point3>, setback: Length, rho: Number) -> Solid
Rounds edges by a conic instead of a circle. Each named edge is replaced by a blend that meets both faces setback back from the edge and is tangent to them there. Between planes, the section of the blend across the edge is the conic arc from one contact to the other, with its corner on the edge and shoulder rho. rho = 0.5 gives a parabola. At a square edge, rho = √2 − 1 gives a quarter circle.
setback must be positive, both contacts must be on their faces, and rho must satisfy 0 < rho < 1.
Example. Solid 1 is a 10 × 20 × 30 mm box with one corner at the origin.
> {"cmd": "fillet_conic", "s": 1, "edges": [[0, 0, 15]], "setback": 2, "rho": 0.5}
< {"ok": 2}common to blends
An edge is named by a point on it. Each point names the edge of s that passes within 10·ε of the point, where ε is the suite's tolerance of 1e-7 mm. A call with a point that names no edge refuses. Naming an edge by a point does not depend on how any kernel numbers or labels its topology, and a test can compute such a point from the solid's definition.
A blend runs along the whole tangent chain of its edge. The chain is the named edge and every edge reached from it through vertices where the next edge leaves in the direction in which the last edge arrived. The top loop of a prism on a rounded rectangle is one chain, so a point on any edge of that loop blends the whole loop. Following the chain is the work of the function, and so of the kernel. An adapter passes on the edge the point names and no other edge.
| Function | Fields | Returns |
|---|---|---|
fillet | s, edges, radius | Solid |
fillet_radii | s, edges, radii | Solid |
fillet_variable | s, edge, from, r_from, r_to | Solid |
fillet_conic | s, edges, setback, rho | Solid |
fillet_g2 | s, edges, offset, center | Solid |
fillet_setback | s, edges, radius, setback | Solid |
fillet_setback_g2 | s, edges, radius, setback | Solid |
fillet_faces | s, face_a, face_b, radius | Solid |
full_round | s, side_a, middle, side_b | Solid |
chamfer | s, edges, distance | Solid |
chamfer_two | s, edge, face, d1, d2 | Solid |
chamfer_distances | s, edges, distances | Solid |