Skip to content
brep-conformancegithub

Operations

Suite 1.0.0 · 62 operations · how each is specified

offered not offeredas revolve stand-inarris0.10.011-18-2026 run37/62offeredopencascade8.0.1.1.011-18-2026 run51/62offeredsolidcore1.0.111-18-2026 run27/62offeredspringrep1.0.011-18-2026 run62/62offered
Constructorstested by constructions tests9/1312/1310/1313/13
boxbox(frame: Frame, size: Length[3]) -> Solid
cylindercylinder(frame: Frame, radius: Length, height: Length) -> Solid
spheresphere(frame: Frame, radius: Length) -> Solidas revolve
torustorus(frame: Frame, major: Length, minor: Length) -> Solidas revolve
conecone(frame: Frame, bottom: Length, top: Length, height: Length) -> Solidas revolve
extrudeextrude(frame: Frame, profile: Profile, height: Length) -> Solid
revolverevolve(frame: Frame, profile: Profile, angle: Angle) -> Solid
screwscrew(frame: Frame, profile: Profile, rise: Length, angle: Angle) -> Solid
loftloft(frame: Frame, profile: Profile, scale: Number, height: Length, top: Profile) -> Solid
loft_throughloft_through(frame: Frame, profiles: list<Profile>, heights: list<Length>) -> Solid
sweepsweep(frame: Frame, profile: Profile, path: Path) -> Solid
sweep_pathsweep_path(frame: Frame, profile: Profile, path: Spline3, twist: Angle) -> Solid
slabslab(frame: Frame, size: Length[2], knots_u, knots_v: list<Number>, heights: list<list<Length>>) -> Solid
Booleanstested by booleans tests5/55/53/55/5
unionunion(a: Solid, b: Solid) -> Solid
intersectionintersection(a: Solid, b: Solid) -> Solid
differencedifference(a: Solid, b: Solid) -> Solid
union_allunion_all(solids: list<Solid>) -> Solid
difference_alldifference_all(target: Solid, tools: list<Solid>) -> Solid
Blendstested by chamfers and fillets tests2/126/123/1212/12
filletfillet(s: Solid, edges: list<Point3>, radius: Length) -> Solid
fillet_radiifillet_radii(s: Solid, edges: list<Point3>, radii: list<Length>) -> Solid
fillet_variablefillet_variable(s: Solid, edge: Point3, from: Point3, r_from: Length, r_to: Length) -> Solid
fillet_conicfillet_conic(s: Solid, edges: list<Point3>, setback: Length, rho: Number) -> Solid
fillet_g2fillet_g2(s: Solid, edges: list<Point3>, offset: Length, center: Length) -> Solid
fillet_setbackfillet_setback(s: Solid, edges: list<Point3>, radius: Length, setback: Length) -> Solid
fillet_setback_g2fillet_setback_g2(s: Solid, edges: list<Point3>, radius: Length, setback: Length) -> Solid
fillet_facesfillet_faces(s: Solid, face_a: Point3, face_b: Point3, radius: Length) -> Solid
full_roundfull_round(s: Solid, side_a: Point3, middle: Point3, side_b: Point3) -> Solid
chamferchamfer(s: Solid, edges: list<Point3>, distance: Length) -> Solid
chamfer_twochamfer_two(s: Solid, edge: Point3, face: Point3, d1: Length, d2: Length) -> Solid
chamfer_distanceschamfer_distances(s: Solid, edges: list<Point3>, distances: list<Length>) -> Solid
Changing a solidtested by modify tests2/76/72/77/7
offsetoffset(s: Solid, distance: Length) -> Solid
offset_facesoffset_faces(s: Solid, faces: list<Point3>, distance: Length) -> Solid
delete_facesdelete_faces(s: Solid, faces: list<Point3>) -> Solid
move_facesmove_faces(s: Solid, faces: list<Point3>, matrix: Placement) -> Solid
thickenthicken(s: Solid, faces: list<Point3>, thickness: Length) -> Solid
shellshell(s: Solid, open: list<Point3>, thickness: Length) -> Solid
draftdraft(s: Solid, faces: list<Point3>, origin: Point3, pull: Vector3, angle: Angle) -> Solid
Exchangetested by step tests2/33/30/33/3
write_stepwrite_step(s: Solid) -> string
sewsew(text: string, tolerance: Length) -> Solid
read_stepread_step(text: string) -> Solid
Queriestested by queries tests16/2017/208/2020/20
volumevolume(s: Solid) -> Volume
areaarea(s: Solid) -> Area
classifyclassify(s: Solid, points: list<Point3>) -> list<"in" or "on" or "out">
closestclosest(s: Solid, points: list<Point3>) -> list<Point3>
normalnormal(s: Solid, points: list<Point3>) -> list<Vector3 or null>
curvaturecurvature(s: Solid, points: list<Point3>) -> list<Number[2] or null>
checkcheck(s: Solid) -> list<string>
centroidcentroid(s: Solid) -> Point3 or null
inertiainertia(s: Solid) -> Number[3][3]
distancedistance(a: Solid, b: Solid) -> Length
interferenceinterference(a: Solid, b: Solid) -> {volume: Volume, gap: Length}
bettibetti(s: Solid) -> Count[3]
section_areasection_area(s: Solid, origin: Point3, normal: Vector3) -> Area
sectionsection(s: Solid, origin: Point3, normal: Vector3, tolerance: Length) -> list<list<Point3>>
projectproject(s: Solid, direction: Vector3, tolerance: Length) -> {visible: list<list<Point2>>, hidden: list<list<Point2>>}
bounding_boxbounding_box(s: Solid) -> Point3[2]
splitsplit(s: Solid, origin: Point3, normal: Vector3) -> Solid[2]
meshmesh(s: Solid, tolerance: Length) -> {positions: list<Point3>, triangles: list<Index[3]>}
displaydisplay(s: Solid, tolerance: Length) -> {faces: list<{positions: list<Point3>, normals: list<Vector3>, triangles: list<Index[3]>}>, edges: list<list<Point3>>}
raycastraycast(s: Solid, origin: Point3, direction: Vector3) -> list<Length>
Moving a solid1/22/21/22/2
transformtransform(s: Solid, matrix: Number[3][4]) -> Solid
affineaffine(s: Solid, matrix: Number[3][4]) -> Solid