Skip to content
brep-conformancegithub

chamfer

Blends · api.md § chamfer · all operations

chamfer(s: Solid, edges: list<Point3>, distance: Length) -> Solid

Bevels edges. Each named edge is cut by the surface through the two lines that lie distance back from the edge, one along each face.

edges must name one edge or more, distance must be positive, and each cut must stay on its faces. Where the faces are planes, the cut is the plane through those two lines. About a circular edge of a solid of revolution, the cut is the cone through the two circles. Corners where chamfered edges meet are not yet specified. s is left as it was.

Example. Solid 1 is a 10 × 20 × 30 mm box with one corner at the origin.

> {"cmd": "chamfer", "s": 1, "edges": [[0, 0, 15]], "distance": 2}
< {"ok": 2}

An edge is named by a point on it. Each point names the edge of s that passes within 10·ε of the point, where ε is the suite's tolerance of 1e-7 mm. A call with a point that names no edge refuses. Naming an edge by a point does not depend on how any kernel numbers or labels its topology, and a test can compute such a point from the solid's definition.

A blend runs along the whole tangent chain of its edge. The chain is the named edge and every edge reached from it through vertices where the next edge leaves in the direction in which the last edge arrived. The top loop of a prism on a rounded rectangle is one chain, so a point on any edge of that loop blends the whole loop. Following the chain is the work of the function, and so of the kernel. An adapter passes on the edge the point names and no other edge.

FunctionFieldsReturns
fillets, edges, radiusSolid
fillet_radiis, edges, radiiSolid
fillet_variables, edge, from, r_from, r_toSolid
fillet_conics, edges, setback, rhoSolid
fillet_g2s, edges, offset, centerSolid
fillet_setbacks, edges, radius, setbackSolid
fillet_setback_g2s, edges, radius, setbackSolid
fillet_facess, face_a, face_b, radiusSolid
full_rounds, side_a, middle, side_bSolid
chamfers, edges, distanceSolid
chamfer_twos, edge, face, d1, d2Solid
chamfer_distancess, edges, distancesSolid